Every quotation carries a shelf life: 24 months, 36 months, sometimes 5 years. Almost none of them says what the number is a claim about. It is not a property of the molecule — it is a prediction for a specific package, at a specific temperature and humidity, validated by data the supplier may or may not be able to show you.
Two dates that are not the same
An expiry date means: after this date, do not use the material. A retest date means: after this date, test it again before use, and if it still meets specification, keep using it. Pharmaceutical APIs are typically given retest dates; cosmetic and food ingredients are usually given a shelf life, which is a commercial simplification of the same idea.
The practical difference matters when a drum sits in your warehouse for a year. With a retest date, you re-qualify and carry on. With a shelf life, the material expires whether or not it has degraded — the clock is administrative, not chemical.
What the stability data behind the claim looks like
| Study | Conditions | Duration | What it supports |
|---|---|---|---|
| Accelerated | 40 ± 2 °C / 75 ± 5% RH | 6 months | Extrapolation to a tentative shelf life |
| Intermediate | 30 ± 2 °C / 65 ± 5% RH | 6 months | Only if significant change occurs under accelerated conditions |
| Long-term | 25 ± 2 °C / 60 ± 5% RH or 30 ± 2 °C / 65 ± 5% RH | 12 months minimum, and continuing | The shelf life actually claimed |
Under ICH Q1A(R2), a "significant change" is not a matter of opinion: a 5% change in assay from the initial value, any degradation product exceeding its limit, a failure of appearance or physical attributes, pH outside specification, or a failure of preservative content. If the accelerated study shows one of these, the intermediate condition becomes mandatory and the extrapolation shortens.
Which raw materials age, and how
Not all materials fail the same way, and this is where a generic "24 months" becomes misleading:
- Saturated hydrocarbons such as white mineral oil barely change in a closed drum: no double bonds to oxidise. Five-year claims are credible if the drum is sealed and stored out of sunlight.
- Esters with unsaturation age by oxidation first, hydrolysis second. Peroxide value climbs before the assay moves, so a batch can pass assay and fail on odour.
- Ethoxylates pick up peroxides and yellow over time, and the rate depends on headspace and trace metals more than on temperature alone.
- Natural tocopherols are antioxidants that oxidise themselves; a dark colour in vitamin E (CAS 10191-41-0) after two years is normal chemistry, not a supplier defect.
- Hydrates and hygroscopic salts gain or lose water with ambient humidity, which changes weight, flow and assay.
Why your own data outranks the supplier's
A supplier's shelf life is validated in their package, not yours. Decant into a smaller HDPE container, leave it half-full in a warm room, and the 24-month claim no longer describes your material. The rule that survives audits: the supplier's retest date is a starting hypothesis; your own stability data at your own storage conditions is what governs use.
If you buy in bulk and repack, run a simple protocol — one batch, three time points, assay plus water plus colour plus peroxide. For oxidation-sensitive esters, pair it with peroxide and anisidine values; for unsaturated esters, iodine value tells you how much of the molecule is exposed in the first place.
What to ask before accepting a shelf life
- Which package, and which storage conditions? A number without both is marketing.
- Is it a shelf life or a retest date? They lead to different warehouse decisions.
- What is the limiting attribute — assay, colour, peroxide, water? That tells you what to monitor.
- Can they show the long-term data, not just the accelerated study? Six months at 40 °C supports an extrapolation, not a five-year claim.
We supply white mineral oil 22# (CAS 8012-95-1), vitamin E (CAS 10191-41-0), isopropyl myristate (CAS 110-27-0), caprylic/capric triglyceride (CAS 65381-09-1), polysorbate 80 (CAS 9005-65-6), PEG-40 hydrogenated castor oil (CAS 61788-85-0), cetearyl alcohol (CAS 67762-27-0), sorbitan stearate (CAS 1338-41-6), glyceryl caprylate (CAS 26402-26-6) and citric acid anhydrous (CAS 77-92-9). Shelf life and storage conditions are stated per product; where a customer needs a retest protocol, we will supply the batch data behind it.